What to do when your cell phone doesn’t charge? Problems when recharging your mobile phone can occur from one moment to the next. The causes and solutions vary from case to case. Although mobile charging port repair in Brookhaven is the ideal solution, but there’re some steps you can take to ensure whether it’s a hardware or software failure. Below are tips for diagnosing and solving this problem.
It is worth remembering that the following guidelines are recommended only for an initial analysis. In case of mobile charging port repair in Brookhaven, you should always seek technical assistance offered by Fixed in Minutes.
The guide also teaches how to clean the cell phone charger port, and applies to devices from different brands, such as Motorola, Samsung, iphone, etc. Keep reading!
The first step may be to alternate combinations of chargers, cables and sockets to check that everything is working correctly. Always opt for original products or those certified by the manufacturers, in order to avoid accidents and damage to your cell phone. If the device allows you to remove the battery without relying on technical assistance, try changing it. Buy genuine parts and accessories from Fixed in Minutes. We offer affordable mobile charging port repair in Brookhaven.
Make sure the device’s power connectors and charging cable are clean. The idea is to check if there is dirt and debris obstructing the electrical contacts, which prevents the transmission of power to the cell phone. It may be interesting to use a magnifying glass to check the condition of your connector. If you find dirt on the contacts, you can try to remove it, but remember to be careful.
Some cell phones have defense mechanisms against high temperatures. If the battery starts to get too hot during recharging, the phone blocks the power supply to prevent accidents. If it is happening to your cell phone, wait for it to cool down. It is also worth checking whether the overheating is caused by a faulty charging port or poor quality accessory. In some cases mobile charging port repair in Brookhaven is necessary.
If the battery has dropped to 0% and the cell phone has been unused for a long time, it may need a prolonged recharge to start working again.
Besides dirt, there are other possibilities that can prevent the device from charging, such as oxidation, a damaged connector or even short-circuited components. To examine the device, you must turn off your phone before handling it. With your mobile device turned off, use a flashlight to carefully examine the charging port for any obstructions caused by a sticky substance that has accumulated around the edges. For simple, regular cleaning, use a microfiber cloth or a toothbrush with soft bristles just to remove dust. Avoid using detergent, water or fabrics that release lint.
To thoroughly clean the charging port, dip the tip of a cotton swab in a container containing isopropyl alcohol with just 1% water in its composition and, carefully, gently pass it over the connector entrance. It allows the cotton to absorb the dirt. It is recommended to wait at least 30 minutes before connecting your cell phone to the charger. If the issue still exists, you need to opt for mobile charging port repair in Brookhaven.
If none of the tips worked, you may need to call in specialized technical assistance, capable of isolating the problems and identifying them. For reliable, genuine, and affordable mobile charging port repair in Brookhaven, feel free to visit Fixed in Minutes. Call now!
